The paper describing the X-ray Integral Field Unit at the end of the Athena reformulation phase published in Experimental Astronomy!

Accueil > Consortium > Articles > The paper describing the X-ray Integral Field Unit at the end of the Athena reformulation phase published in Experimental Astronomy!

Date.

From July 2022 to November 2023, the Athena mission and its instruments underwent a reformulation phase. This led to a modification of certain X-IFU performances, detailed in the new scientific reference publication on the instrument. The publication led by Philippe Peille was published in Experimental Astronomy and is available in open access on ArXiv.

Abstract

The Athena mission entered a redefinition phase in July 2022, driven by the imperative to reduce the mission cost at completion for the European Space Agency below an acceptable target, while maintaining the flagship nature of its science return. This notably called for a complete redesign of the X-ray Integral Field Unit (X-IFU) cryogenic architecture towards a simpler active cooling chain. Passive cooling via successive radiative panels at spacecraft level is now used to provide a 50 K thermal environment to an X-IFU owned cryostat. 4.5 K cooling is achieved via a single remote active cryocooler unit, while a multi-stage Adiabatic Demagnetization Refrigerator ensures heat lift down to the 50 mK required by the detectors. Amidst these changes, the core concept of the readout chain remains robust, employing Transition Edge Sensor microcalorimeters and a SQUID-based Time-Division Multiplexing scheme. Noteworthy is the introduction of a slower pixel. This enables an increase in the multiplexing factor (from 34 to 48) without compromising the instrument energy resolution, hence keeping significant system margins to the new 4 eV resolution requirement. This allows reducing the number of channels by more than a factor two, and thus the resource demands on the system, while keeping a 4′ field of view (compared to 5′ before). In this article, we will give an overview of this new architecture, before detailing its anticipated performances. Finally, we will present the new X-IFU schedule, with its short term focus on demonstration activities towards a mission adoption in early 2027.

Related articles

Successful coupling of the X-IFU Warm Front-End Electronics demonstrator at SRON

A major milestone has been reached beginning of October 2025 in the development of the Warm Front-End Electronics (WFEE) for […]

Lire l'article

The first test of the Cryogenic AntiCoincidence detector (CryoAC) inside the X-IFU Demonstration Model 1.1 has been successfully completed

Image above : The CryoAC demonstration prototype integrated in the detectors flange of the Focal Plane Assembly Demonstration Model 1.1. […]

Lire l'article

Assembly of Demonstration Model for X-IFU’s camera is now complete

SRON is responsible for building the camera for the X-IFU imaging spectrometer onboard the NewAthena X-ray space telescope. A latest […]

Lire l'article

Wide band transmission response of X-IFU thermal filters

The paper titled “Wide Band Transmission Response of the Filters for the X-IFU Detector of the Athena Observatory”, presented at ICSO […]

Lire l'article

X-IFU Consortium meeting #20

Last week we had the 20th X-IFU Consortium meeting at IRAP in an hybrid format. A very successful gathering, in […]

Lire l'article

Restez informé !

Recevez la newsletter X-IFU

    French